Magnetic-inductive flow transmitter flowTRANS MAG I01


for liquids
Other characteristics
analog output


Plug-in magnetic-inductive flow transmitter JUMO flowTRANS MAG I01 The transmitter can be used in liquids with a conductivity as of 20 μS/cm. Standardized fittings ensure simple insertion of the transmitter into pipes from DN 15 to DN 400. The output signal is 4 to 20 mA and the pulse frequency signal is 0 to 240 Hz. Minimal installation effort Configurable switching outputs Standardized fittings general technical dates Measuring range – 0.2 to 10 m/s Nominal pressure – PN 16 Medium temperature – Max. 150 °C Nominal pipe width – DN 15 to DN 400 Outputs – 4 to 20 mA; pulse frequency; switching output (changeover contact relay) Measuring accuracy – ≤ ± 3.5 % of the measured value (standard calibration factor); ≤ ± 0.5 % of the measured value (Teach-In) Parts in contact with medium – Stainless steel 316L (1.4404); FKM or EPDM; PEEK Protection type – IP65 Medium – Conductive liquids as of 20 μS/cm Voltage supply – DC 18 to 36 V Accessories – T-fittings made of PVC or stainless steel; PE or stainless steel welded socket; PP connection clamps (type 406090)